The PowerPallet is an innovative bolt-on retrofit kit designed to instantly convert your manual pallet jack into a semi-motorized one by simply attaching it to your pallet truck. Unlike the standard model, this PowerPallet kit is equipped with a dual drive wheels providing increased maneuverability, stability and traction. It is ideal for warehouses with bumpy foors as well as reefer trucks that have the slatted floors.
Due to its extra dual drive wheels, your pallet jack can easily run through rough or uneven floors making it perfect for outdoor material handling activities such as for use in refrigerated trucks. It is made out of durable and quality drives and component guaranteeing long service life and excellent performance despite consistent usage.
The PowerPallet Drive Kit can be installed on most pallet jacks. Simply specify and fill-up the current information you have on your pallet jack on our website will be able to provide you with a PowerPallet that fits your pallet truck perfectly. You can also refer to our specs for more detailed information on the PowerPallet.
This PowerPallet Manual Pallet Jack Converter with Dual Drive Wheel includes the complete package of the kit consisting of the drive unit, mount plates, tiller control unit, battery pack and charger. It is ergonomically engineered and highly intuitive design making it fairly easy to install and use. You can watch the video provided for the instructions on how to attach the PowerPallet to your current Pallet Jack. Note that this does not come with a pallet jack.
A low acquisition cost and even lower operating cost makes a big difference to your bottom line. It has a compact and powerful design with speeds reaching up to 3.7 mph. Depending on your application, the PowerPallet can run into different modes and speeds offering more control as well as providing you with an excellent user experience.
Other Features:
Specifications:
Have a look at this video demonstrating the PowerPallet in use as well as assembly instructions.
For more details you can also see the complete manual here.
Learn How To Measure and Mount Your Pallet Jack to the PowerPallet 2000
\
Unparalleled Safety Features Multiple circuitry redundancy (incl.multiple E-Stop button activators); Hand-proximity confirmation on throttle activation (unit won’t move without operator’s hand on throttle);E-Stop circuitry is checked after each time the machine auto powers off. |
Exceptional Technolgy Features
RPM-matched speed (consistent throttle response regardless of load); controlled
hill decent, hill holding and hill-climbassist; “intelligent” dynamic braking;
smartphone configurable settings for accel/decel rates, max. speed, auto/
manual horn; usage logging and more.
|
Never Down For Recharging issues & No More Cold Battey Issues
Instead of using the large, heavy lead acid batteries that conventional electric
fork trucks use, the PowerPallet uses compact, quick-charge,
quick-change, 46V NiMH battery packs. They can be easily removed
to minimize exposure to low temp’s(outdoors or in freezer trucks) when not
in use, greatly improving battery performance. |
Flexibilty To Change Pallet Lack Brands and Models
An expanding library of (inexpensive) mounting plates are offered to allow
attachment of the PowerPallet to an array of popular pallet jacks.
Owners can easily switch between or mix different models of manual
jacks over time while maintaining a consistent operator interface ... being
the PowerPallet’s throttle and drive system |
Seperation of Technology from Commodity
This patented concept allows the ‘technology component’, the PowerPallet drive unit, to
be easily removed from the ‘commodity component’, a worn-out manual pallet
jack, and moved over onto a new jack to start its next life. The result is that a
PowerPallet sees a much longer service life at a lower acquisition and annual cost.
|
Minimal Maintenance Required
with no mechanical or electrical experience or special tools required.
The PowerPallet has been designed and built to be virtually maintenance free.
The minimal amount of maintenance and parts required are inexpensive
to purchase and easy to replace (see Step-by-Step YouTube® videos)
|
The pallet jack that we recommend this kit for is the Crown PTH50 or one of the others listed under the Technical Details tab above, as there will be no need to fill out all the specs of the pallet jack you will be installing the kit on, since we will already know the specs of that pallet jack, and we can ensure that the kit will fit on those jacks. For other pallet jacks see below.
In order to ensure that you receive the appropriate fittings for your pallet jack, we will need some information that can be filled out when ordering. Please specify your current Pallet Jack - Brand and Model, as well as the points shown below.
There are also some limitations as you will see.
A) Diameter of steer wheels - Requirements: Between, 6.5 Inches and 7.28 Inches
B) Inner distance between steer wheels - Smaller than 2.95 Inches requires an axle kit ($15 add-on charge)
C) Diameter of axle - Requirements: Between, 1 Inch and 1.07 Inches
D) Diameter of lower pump shaft at top of steer wheels - Requirements: Between, 1.96 Inches and 2.33 Inches
E) Clearance between bottom of lower pump shaft & floor - Requirements: Between - 2.55 Inches and 2.76 Inches
F) Thrust plate can not taper down more than 3" common on low profile pallet jacks (see detailed images for picture of thrust plate)
G) We can only accomodate non-articulating axles. Assume that you have a non-articulating axle unless you know otherwise, as the articulating ones are very rare (they feature an independent suspension for each wheel).
Important: When measuring the diameter of the lower pump assembly, if your pump tapers down, please make sure to give us the diameter of the widest point.
Some handles, like the old Multiton, Bishamon, and BT jacks, have a unique handle design that will not accomodate the PowerPallet kit. Pallet Jacks with brake levers or other devices, also can not accomodate the kit. See detailed images for handles that will not work.
If you plan on using the kit on a pallet jack servicing a refrigerated truck, please call us to discuss first, as it will not be compatible with the slatted style refrigerated truck floors.
Brand | Model | Yr-Yr |
Blue Giant | FPT-55 | Not Given |
Cat | 5500lbs capacity | Not Given |
Cat | A400002043 | 2016 |
Cat | 2017 | |
Caterpillar | RPA 40000 | 2015 |
Clark | CJ55 | 2015 |
Clark | CJ55 | 2015 |
Costco Pallet | ||
Crown | PTH50 | 12-CUR |
Dayton | 4YX97 | Not Given |
Dura Llift | Unicarrier AC25 | 2017 |
Eagle 55 | EAG27*48 | ? |
EOS Lift | DBD25 | |
Geprufte Sicherhelt | 6600# | Not Given |
Global Industrial | 168081 | Not Given |
Global Industrial | WB168039 | 2016 |
Haul Master | 68761 | 2015 |
Hyster | ECO 1-55 | 2015 |
Jet | PT2748 same as CAT52mm | |
Lift Rite | LG55270048 | ? |
Lift Rite Narrow | Titan, Low Pro Shorty | |
Lifter | GS NR 264528 | 1998 |
Little Mule | Unknown | unknown |
Multilift | PSD3000N | 2016 |
Multiton | AM2200 | |
Nicto | E-Z Pallet Lift | 2000 |
NobleLift | AC 25 | 2016 |
NobleLift | DF | |
PM4 | 2748-LP | 2015-2016 |
Raymond | RJ50 | 07-CUR |
Raymond | RJ50N | 2017 |
Roughneck | ||
Ruyi - Interthor | ETT | 2017 |
Ruyi or Xilin | DF-11 | |
Titan | TS55 | 2010 |
Total Source | TSP5500 | unknown |
Toyota | HPT25 | 07-13 |
TVH | HJ5500 | |
Uline | H-1043 | 2015 |
Uline | H-1193 | 2015 |
Uline | H-1365 | 2014 |
Uline | H-1780 | 2014 |
Ultra | ALT 50 | 2015 |
Vestil | L60A | 2010 |
Vestil (paper roll jack) | PM4-3348-RL | 2013 |
Vestil (paper roll jack) | PM4-4548-RL | |
WESCO | 272747 | |
Wesco | 272744 | |
Wesco | 272660 | 1997-2017 |
Wesley International | 58-56-55SLRT | 2016 |
Wesley International / Pallet Mule | 72-44-55SL2.9 | 2012 |
Wesley International / Pallet Mule | 36-38-5D SLRT | 2009 |
Yale | ECO 1-55 | 2015 |