0
Aluminum Cypress Wagon with UV Deck
- Details
Tap Image To Zoom
Expand descriptionThis Cypress Wagon from Alumacart features a polypropylene deck measuring 48.5″ long and 26.5″ wide with a maximum carrying capacity of 400 lbs offering plenty of room to work with. The deck perforated deck is UV protected protecting your loads as well as the wagon from the harsh sunlight making it ideal for fishing trips, hunting, camping, gardening, the beach, fairs, festival or anyoutdoor activities.
The Cypress Wagon with UV Deck is fully constructed and welded with high grade aluminum built with maximum durability and resilence in mind for rough and heavy duty material handling. Unlike other carts, it is highly resistant to rust and corrosion guaranteeing longevity despite usage under harsh conditions.
It is equipped with a total of four 10″ pneumatic tires with pivoting front wheels and axle providing outstanding maneuverability and fairly easy to navigate and control on most terrains. Upgrade your tires and trade them for flat-free ones which makes the wagon more suitable to rough and uneven terrains/surfaces.
This Aluminum Cypress Wagon with UV Deck is ergonomically designed and engineered to cater all your needs no matter the application. It is available in various other options that expands and adds to its already amazing features. If you’re handling bulky and larger items than usual get the optional wall wagon for added safety and security.
Also available in a smaller-sized model.
Available Options:
- Flat-Free Tire Upgrade - Replaces the Pneumatic wheels with 10″ Solid polyurethane foam tires are lightweight, non marking & never go flat complete with 2.25″ offset hub & 5/8″ or 3/4″ bearings as well as grease fittings. Also perfect for pressure washers, hand trucks, generators & much more.
- Balloon Sand Tire Upgrade - Replaces the Pneumatic wheels with four 30 cm Balloon Polyurethane Wheel with 7/8” Polypropylene Hub measuring 11.8″ in diameter and 7″ width. It is best suited over sand and soft terrain. It has no bearings, no risk of binding in the sand.
- Wagon Wall - Adds an 8.5" tall wall fabricated using 4″ x 1″ aluminum channel for horizontal walls and 1″ x 1/8″ square aluminum tubing for wall uprights on top of the wagon providing better security and protection to your loads. Walls slide into ten aluminum receivers (1 1/4″ square tubes) that are bolted to the bed of the wagons with all stainless steel hardware. Can be removed at any time, each side can be independently removed also. (Note: The space between the lip of the deck and the bottom of the horizontal wall is 3-1/4”. The total overall height of the walls from the bottom of the deck is 8-1/2”)
- Rod Racks –A Single Rod Rack Accessory containing a total of four rod holders. It can be added & removed at anytime, comes with all stainless steel mounting hardware. It is fabricated using 3/16″ aluminum flat bar 21″ long bolted to wagon bed and 2″ round 9″ long aluminum tubing for rod holders
- Cutting Board - All aluminum board and stainless steel hardware. Cutting board pipe slides easily into Alumacart rod holders which are 2″ in diameter. It includes cup holder with drain hole, lure holes and knife and pliers holes. It measures 25" Long x 14" Wide x 10" Deep and weighs at around 6 lbs.
- Paddleboard/ Surf Board Holder - Fabricated with heavy duty aluminum guaranteeing durability and longevity. Aluminum upright is fabricated using 1 3/4″ round aluminum pipe which slides into any Alumacart rod holder. “Arms” of the holders are fabricated using 1″ aluminum pipe and covered in rubber safety padding to protect your boards. It measures It measures 44" Long x 23" Wide x 1.66" Deep weighing at around 14 lbs per holder.
- Chair Holder - A pair of holders designed to hang your foldable chairs. It measures 44" Long x 15.5" Wide x 1.66" Deep weighing at around 11 lbs per holder. It slides easily into Alumacart rod holders which are 2″ in diameter.
- Wagon Hitch – A hitch constructed out of heavy duty all aluminum welded construction with stainless steel hardware. It makes it easier to transport the wagon to your desired location. The 2″ x 1/4″ square radius aluminum tube slides easily into any standard tow package. Also includes LED brake light.
- Clevis Attachment - Fabricated using 1 1/2″ x 3/8″ aluminum flat bar welded to 1 1/4″ square aluminum tube to slide over 1″ square tube on the pull wagon handles. It can easily slide over all of our pull wagon handles for easy accessibility and storage. Now you can haul your wagon behind your ATV, golf cart or lawn mower. It measures 9.5" Long x 1.5" Wide x 2" Deep and weughs at around 3 lbs.
Overall Features:
- Comes standard with UV protected polypropylene deck bed inlay welded inside a 2″ x 3″ x 1/8″ architectural angle frame which offer a alrger capacity and durable platform
- 3″ Tall Framing provides a non-slip bed for safety and security.
- Pivoting front wheels & axle provide “fifth” wheel steering for easy maneuverability.
- Comes standard with 10″ pneumatic tires perfect for standard material handling
- The 48.5″ by 26.5″ wide perforated deck makes this wagon perfect size for garden centers, barns, stables, marinas & even around the house.
- All aluminum welded construction and stainless steel hardware makes this lightweight, yet heavy-duty, wagon a must have.
- Rust and corrosion resistant
- Design eliminates workers compensation claims, for bad backs. You never actually “lift” the load.
- Requires little to no maintenance
Specifications:
- Load Capacity: 400 lbs
- Deck Size (Length x Width): 48.5″L x 26.5″W
- Overall Dimensions (Length x Width x Height):49”L × 26”W × 11”H
- Weight: 37 lbs
Aluminum Cypress Wagon with UV Deck - Reviews
There are no reviews for this product.
Free Shipping*On 100's of Products + No Sales Tax*Excluding CA & NJ
