Handtrucks2GO Dollies Three Point Tri-Glides

Hilman 3 Point Tri-Glide Roller System - 20 Ton

Ask A Question Send to friend Availability

		(0 reviews) (0 reviews)

20 Ton Hilman Tri-Glide Roller System

The 20 Ton Hilman Tri-Glide Mover System, a three-point moving system is designed for moving heavy loads over specially coated floors. It is comprised of a front steering unit and two rear adjustable units. Hilman Rollers’ Tri-Glide was developed in response to a growing demand for floor protection when moving heavy loads over smooth, painted, finished, or sealed floors.

The Tri-Glide is another safe, efficient, reliable product from the makers of Hillman Rollers. The Tri-Glide 3-point moving system provides a safe and efficient method for moving heavy objects. With the rear units kept aligned by use of a spreader bar, the rear dollies can be adjusted from a range of 10” apart to as much as 48” apart.

Placing the dollies where support is needed ensures the rear dolly will be kept parallel in order to track properly when moving. Just as the rear wheels of your car follow the front when you turn, so too will the Tri-Glide’s rear dollies follow the front. Thus 3- point moving affords the user a wide range of mobility.

Placing the dollies in a 3-point configuration can stabilize the rollers and prevent them from slipping out, even under pulling and tugging forces. As the load is steered with the front unit, the rear dollies will follow, providing the user with a wide range of mobility. While the 3-point configuration is recommended as a safe load moving solution, additional modules can be added and reconfigured to further stabilize bulky loads

All Tri-Glide Moving Systems contain the following components:

One steerable front unit and two adjustable-width rear units
Front unit has Swivel Padded Top, Padded Hand Grips, and Tow Eye
Two rear units are adjustable in width for larger loads
Built-in For Truck Towing Handle

For more details see the Technical Details Tab on top of the page.
Choose from Nylon, Polyurethane, or Steel rolls to suit your moving requirements.

Also Available In:

Wheel Options:

Nylon - Non-marking wheels for good floor protection and favorable wear. They will not “set” if left under load (static) for a priod of time
Polyurethane - Softer non-marking wheels that provide excellent floor protection on tile floors
Steel - These wheels provide the best wear characteristics and are great for durable floors

Standard Features:

Tri-Glide low-prole keeps the load close to the ground for safe moving
Provides a stable, efficient solution for moving heavy loads
Designed with a large footprint to spread the weight of the load over a greater area
Multifunctional handle with flipping action which provides additional handle bar clearance to prevent steer binding
360-Degree Turntable with Non-Slip Swivel Pad for easy turning
Steerable front unit for added maneuverability
Easy to assemble and disassemble requiring no tools
Tow Latch can be pin locked or left free to articulate during maneuvering
Low height which makes it easier to slip under cargo
Comes with Adjustable Rear Dollies with non-slip pads for fitting under heavy loads with a range of widths
Versatile in that the front and rear units can be combined and configured to become a 4 or more point skidding solution (see detailed images for more info)
Polyurethane and Nylon rollers are non-marking and can be used on a variety of floor surfaces
Front Unit Weight: 113 lbs
Rear Unit Weight: 71 lbs

Overall Specifications:

Total Weight Capacity: 20 Ton/40,000 lbs
Front Weight Capacity: 10 Ton /20,000 lbs
Rear Weight Capacity: 10 Ton /20,000 lbs
Height (w/o pads): 4"
Height (w/ pads): 4.5"
Wheel Diameter: 3.13"
Wheel Count: 16 Front + 16 Rear
Handle Length: 49.5"
Alignment Bar: 60"

Unit weight will vary depending on wheel type. Please refer to the table below:

Model	Wheel Type	Front Weight (lbs)	Rear Set Weight (lbs)
KTG-20N	Nylon	113	71
KTG-20P	Polyurethane	120	78
KTG-20S	Steel	151	109